Reply to thread

Message: <blockquote data-quote="fatryan" data-source="post: 4310204" data-attributes="member: 550026">well memphis just gave me a call. and this is what they said:i can use front or front&amp;rear inputs, but if i use just front i need to use the parallel option to split the front input between the front and rear outputs so i can drive the tweets on the front and mids on the rear.set gains on xover at about 75% and then set with the amp so as to keep the gains low on the amp giving me a cleaner signal.the increments/ticks on each knob really have no purpose.  except the top most tick mark is exactly half of the bandwidth.  and according to my calculations if i wanted to cross the mid and tweet at 3200Hz, id need to have the knobs set to 3/4 (or rather halfway between the top tick and the last tick), which would give me 3125Hz...close enough.does that sound good?</blockquote>

Top