Reply to thread

Message

<blockquote data-quote="fatryan" data-source="post: 4281807" data-attributes="member: 550026">comps are Rainbow CMX kicks 2-way, amp is PG Xenon x200.4, HU is 9800BT (not active capable).&nbsp; just trying to get some opinions on an external processor.&nbsp; someone recommended a Memphis 16-x03, and ive seen it mantioned a couple other times in other threads.&nbsp; what are your opinions?&nbsp; would you recommend anything over this, and why?&nbsp; the memphis is quite pricey but if it means it wont quit on me and damage my comps, its worth it.also, im assuming i will need 2 sets of ~1ft rcas.&nbsp; anything else?&nbsp; i wont be running my sub stage through this (if that is even possible).i plan to just be safe and cross the components where the passive Xover does (3200hz @ 12db per octave i believe).&nbsp; mids will also be set to not go below 80Hz with a 12dB slope (as rainbow requires for the kick version).&nbsp; but my question is, when the mid and tweet are crossed at 3200Hz that means they BOTH drop off at that point? and both require a 12dB slope? and is that where the drop off begins?&nbsp; or is that some other point in the slope, like -3dB?TIA //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif</blockquote>

[QUOTE="fatryan, post: 4281807, member: 550026"] comps are Rainbow CMX kicks 2-way, amp is PG Xenon x200.4, HU is 9800BT (not active capable). just trying to get some opinions on an external processor. someone recommended a Memphis 16-x03, and ive seen it mantioned a couple other times in other threads. what are your opinions? would you recommend anything over this, and why? the memphis is quite pricey but if it means it wont quit on me and damage my comps, its worth it. also, im assuming i will need 2 sets of ~1ft rcas. anything else? i wont be running my sub stage through this (if that is even possible). i plan to just be safe and cross the components where the passive Xover does (3200hz @ 12db per octave i believe). mids will also be set to not go below 80Hz with a 12dB slope (as rainbow requires for the kick version). but my question is, when the mid and tweet are crossed at 3200Hz that means they BOTH drop off at that point? and both require a 12dB slope? and is that where the drop off begins? or is that some other point in the slope, like -3dB? TIA [IMG]//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif[/IMG] [/QUOTE]

Verification