Reply to thread

Message: <blockquote data-quote="jluv" data-source="post: 1784092" data-attributes="member: 567917">So 30-40 watts should be about right for the tweeters?  Where would you recommend setting the crossover point for them?  No lower than ____?I'll try the components out first, but what if I do add 8s?  Could I successfully wire them up with the mids to the A600?  If so, and if the 8s are 4 ohm, and the mids are 3 ohm, what kind of load would that put on my amp?  How would I go about setting a crossover point between the two?  How do others accomplish this when they run an active 3-way setup up front, spcifically with 8s, mids, and tweeters?Thanks again for the reply.</blockquote>

Top