Reply to thread

Message

<blockquote data-quote="sexy" data-source="post: 7003373" data-attributes="member: 612355">Hope some experienced competitors see this post and can give me some feedback. I am building a new box for 2011 season 11ply birch 4 layers thick at minimum heavy gauge square steel tube caged on the outside. What I was wanting feedback on is the use of glass on the inside. Automotive grade safety glass bonded to the birch with body panel adhesive or ¾” polycarbonate instead of glass. Have any of you tried this or know of someone who has done the insides with glass? I wont be using the glass on the sub wall itself because of the weight of the subs. Box will be tuned @70hz&nbsp; final displacement will be between 15/16 cube wont know until that until I get it on the term-LAB I am building 16 cube to start then reducing internals until I get a peak on the meter.Thanks for the feedback in advance. //content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif</blockquote>

[QUOTE="sexy, post: 7003373, member: 612355"] Hope some experienced competitors see this post and can give me some feedback. I am building a new box for 2011 season 11ply birch 4 layers thick at minimum heavy gauge square steel tube caged on the outside. What I was wanting feedback on is the use of glass on the inside. Automotive grade safety glass bonded to the birch with body panel adhesive or ¾” polycarbonate instead of glass. Have any of you tried this or know of someone who has done the insides with glass? I wont be using the glass on the sub wall itself because of the weight of the subs. Box will be tuned @70hz final displacement will be between 15/16 cube wont know until that until I get it on the term-LAB I am building 16 cube to start then reducing internals until I get a peak on the meter. Thanks for the feedback in advance. [IMG]//content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif[/IMG] [/QUOTE]

Verification