Reply to thread

Message: <blockquote data-quote="SlugButter" data-source="post: 8873678" data-attributes="member: 678073"><p>I’m working on this box at the moment for 2 8s. 2 cubes tuned to 32 HZ after all displacements. The port is 3x10x35 inches long. If you’re using a round aeroport, you’ll need to go with 4 inches probably. If you have no flares on the ends you will certainly get port noise. Both of these boxes are 2 cubes tuned to the same frequency, just different subs. As you can see, I had to bring the port out of the box some even using a 4 incher. 5 is definitely too long. You can get more length by firing the port sideways if you can slip it into your design to work that way.</p></blockquote><p></p>

Top