Reply to thread

Message

<blockquote data-quote="SocialStealth" data-source="post: 5794859" data-attributes="member: 606051">I have the input for both sets of speakers at half way up (hu @ 100% volume)The infinity speakers can go up to 3/4 input until they distort, but when I turn the JL Audios input up past 1/2, the amp shuts off? (protective mode?)I read the trouble shooting manual that came with the amp, and it said it may be because of a short in the wiring.What is a short? And what could possibly be the problem? (if it even is a problem...shouldn&#039;t the JL audios imput be 2x higher than the infinities though?)btw, I soldered the terminals onto the speakers (because they were slightly too big) but they&#039;re tight to the pull now. I also put bare wire into the amp itself because the spade terminals I got didnt fit in it.Amp puts out 75 watts rmsJL&#039;s handle 80 RMSInfinities handle 60 RMS</blockquote>

[QUOTE="SocialStealth, post: 5794859, member: 606051"] I have the input for both sets of speakers at half way up (hu @ 100% volume) The infinity speakers can go up to 3/4 input until they distort, but when I turn the JL Audios input up past 1/2, the amp shuts off? (protective mode?) I read the trouble shooting manual that came with the amp, and it said it may be because of a short in the wiring. What is a short? And what could possibly be the problem? (if it even is a problem...shouldn't the JL audios imput be 2x higher than the infinities though?) btw, I soldered the terminals onto the speakers (because they were slightly too big) but they're tight to the pull now. I also put bare wire into the amp itself because the spade terminals I got didnt fit in it. Amp puts out 75 watts rms JL's handle 80 RMS Infinities handle 60 RMS [/QUOTE]

Verification