Reply to thread

Message: <blockquote data-quote="RebelDogg" data-source="post: 4590214" data-attributes="member: 591498">^ I was actually just now reading that thread!I was wondering though, with my zx250.2; I figure it pulls 30a but since I'm only putting out 85w x 2 channels (actually, the speaker are 75w so the gain is turned down a bit. So 75w) would the amperage be less? Like maybe 15a? That would mean a total draw of 85 + 15 which is 100a. And if I turn the gain on the 750w amp down some, it should come in under 100a.And would it hurt anything to just temporarily put say a 110a or 120a fuse on the 4ga?This is all just until Wednesday when my stuff gets here.</blockquote>

Top