Reply to thread

Message: <blockquote data-quote="Firmbiz94" data-source="post: 3632160" data-attributes="member: 581302"><p>i wired it correctly...the mids work fine..the tweets are hooked up into the crossover when i tested different speakers on the tweeter output of the crossover it works perfect..like i said in the first post its a memphis 2004 puts out 150x2..which i read on this forum a million times the rsds would eat up..the gain was set about half way if not less...the only other thing that i can think of is a bad signal...i currently use a LOC to gain a signal from my stock radio..i like the stock radio and do not want to change it.. I run the rcas into the memphis amp from my sub stage amp... i am ordering a eq real soon that will clean up signal and also raise my output voltage to 7 volts.. can tweets blow from a dirty signal..i dunno i they might of been defective i got them off ebay</p></blockquote><p></p>

Top