Reply to thread

Message

<blockquote data-quote="tjsharktank" data-source="post: 2782594" data-attributes="member: 569411">Awesome old school amp $20 SHIPPED!&nbsp; 30x2 into 4 ohms, 40 x 2 into 2 ohms or 80x1 bridged.SpecsNumber of channels: 2AMPLIFIER CLASS: A/bOutput Stage: complementart bipolarPower Supply:&nbsp; SWITCHING Mosfet PWM controlled DC to DC2 OHM stable stereoBridgeableBass BoostHigh and low pass filterRCA LOW LEVEL INPUTSHIGH LEVEL INPUTSMANUFACTURER SPECIFICATIONSPER IHF STANDARDSRMS POWER&nbsp; @ 12VDC [4 OHMS]: 30W x 2 (0.08% THD)RMS POWER&nbsp; @ 12VDC [2 OHMS]: 40W x 2 (0.8% THD)RMS BRIDGED POWER @ 12VDC [4 OHMS]: 80W x 1 (0.8%THD)FREQUENCY RESPONSE (± 3dB): 10HZ ~ 50kHZSIGNAL TO NOISE RATIO: 100dBALOW LEVEL INPUT SENSITIVITY: 100mV ~ 2VINPUT IMPEDANCE: 10K-OHMSPROTECTION: THERMAL, SHORT CIRCUITLOAD IMPEDANCE: 2-8 OHMSDIMENSIONS: 8.25&quot; L x_5.125&quot; W x 2”H FUSES: 1 x 20 (A)</blockquote>

[QUOTE="tjsharktank, post: 2782594, member: 569411"] Awesome old school amp [B]$20 SHIPPED![/B] 30x2 into 4 ohms, 40 x 2 into 2 ohms or 80x1 bridged. [I]Specs[/I] Number of channels: 2 AMPLIFIER CLASS: A/b Output Stage: complementart bipolar Power Supply: SWITCHING Mosfet PWM controlled DC to DC 2 OHM stable stereo Bridgeable Bass Boost High and low pass filter RCA LOW LEVEL INPUTS HIGH LEVEL INPUTS MANUFACTURER SPECIFICATIONS PER IHF STANDARDS RMS POWER @ 12VDC [4 OHMS]: 30W x 2 (0.08% THD) RMS POWER @ 12VDC [2 OHMS]: 40W x 2 (0.8% THD) RMS BRIDGED POWER @ 12VDC [4 OHMS]: 80W x 1 (0.8%THD) FREQUENCY RESPONSE (± 3dB): 10HZ ~ 50kHZ SIGNAL TO NOISE RATIO: 100dBA LOW LEVEL INPUT SENSITIVITY: 100mV ~ 2V INPUT IMPEDANCE: 10K-OHMS PROTECTION: THERMAL, SHORT CIRCUIT LOAD IMPEDANCE: 2-8 OHMS DIMENSIONS: 8.25" L x_5.125" W x 2”H FUSES: 1 x 20 (A) [/QUOTE]

Verification