Reply to thread

Message

<blockquote data-quote="Decado2" data-source="post: 4649974" data-attributes="member: 579646">I have 2 10&quot; Konaki motors that I reconed into 10&#039;s with Fi soft parts. The recones are flatwind aluminum D2 coils and have Fi dustcaps on them.Both subs were powered off a Kicker Kx 2500.1 and were used about 6 months. I dont play my systems loud often so the 10&#039;s are still very stiff, they have 4 spiders according to scott, 3 stiff and one soft.One of the baskets had the terminal holes cut wrong so I had to use a differnet set&#039;s of terminals on it, this sub has to be wired out of phase with the other due to the mixed matched terminals.If anyone is interested I would sell each for $175 shipped, each sub is around 45 pounds so shipping is going to be around $40 give or take.I will ship UPS and can accept paypal or money orders. If your interested message me or respond, I do have feedback here so feel free to check me out.</blockquote>

[QUOTE="Decado2, post: 4649974, member: 579646"] I have 2 10" Konaki motors that I reconed into 10's with Fi soft parts. The recones are flatwind aluminum D2 coils and have Fi dustcaps on them. Both subs were powered off a Kicker Kx 2500.1 and were used about 6 months. I dont play my systems loud often so the 10's are still very stiff, they have 4 spiders according to scott, 3 stiff and one soft. One of the baskets had the terminal holes cut wrong so I had to use a differnet set's of terminals on it, this sub has to be wired out of phase with the other due to the mixed matched terminals. If anyone is interested I would sell each for $175 shipped, each sub is around 45 pounds so shipping is going to be around $40 give or take. I will ship UPS and can accept paypal or money orders. If your interested message me or respond, I do have feedback here so feel free to check me out. [/QUOTE]

Verification