Reply to thread

Message: <blockquote data-quote="revots" data-source="post: 4304537" data-attributes="member: 568076">Alright, I have an Arc Audio 2500xxk, old clarion H/U (no pre outs), eclipse 4 chan amp, treo ss 10" d4 (wired to 8 ohms), and CDT comps.I got the soche LOC from wall mart and wired it up to the H/U. I already had power, ground (0GA), etc.. ran. Everything worked fine but, when I pushed the H/U into the dash and turned it on, NOTHING.The Arc was in protect so I checked all of the wiring. I couldn't find a problem so I ran a new remote, re-wired the LOC, and checked ohms, RCA's, etc.. I still have no sound! The H/U is reading disks and shows that it is playing, I'm pretty sure the amps are fine but what else can I do to find this short or whatever the hell it is. Thanks.</blockquote>

Top