Reply to thread

Message

<blockquote data-quote="ameuba10" data-source="post: 6721893" data-attributes="member: 584038">i plan on building my own 3way setup with cdt speakers. i have M6+ as my midbass in the doors (still needs to be sealed and deadened). then i also have CL-4 midranges paired up with TW-26 tweets in my kick panels. i have a jl audio 450/4 that will power the whole system. the M6+ will be connected straight to the amp for 150W each, and the other 2 channels will send 75W each to the cdt xovers (forgot which model) and then to the midranges and tweets.1) is that enough power for those components?2) will my M6+ sound bad until i seal and deaden the doors?3) my kick panels arent sealed. can the CL-4 be ran semi IB? the reason i say semi is because the edges of the kicks meet to the carpet but there isnt a &quot;back&quot; or a &quot;bottom&quot; to the kick panels. i was thinking of just stuffing some polyfill in there.4) how should i set the amp and xover? at what points?thanks for all the help!</blockquote>

[QUOTE="ameuba10, post: 6721893, member: 584038"] i plan on building my own 3way setup with cdt speakers. i have M6+ as my midbass in the doors (still needs to be sealed and deadened). then i also have CL-4 midranges paired up with TW-26 tweets in my kick panels. i have a jl audio 450/4 that will power the whole system. the M6+ will be connected straight to the amp for 150W each, and the other 2 channels will send 75W each to the cdt xovers (forgot which model) and then to the midranges and tweets. 1) is that enough power for those components? 2) will my M6+ sound bad until i seal and deaden the doors? 3) my kick panels arent sealed. can the CL-4 be ran semi IB? the reason i say semi is because the edges of the kicks meet to the carpet but there isnt a "back" or a "bottom" to the kick panels. i was thinking of just stuffing some polyfill in there. 4) how should i set the amp and xover? at what points? thanks for all the help! [/QUOTE]

Verification