Reply to thread

Message

<blockquote data-quote="bent70" data-source="post: 551165" data-attributes="member: 556898">I have a crew cab f-250.I will have a sealed enclosure for my 15&quot; xxx as my center console, with the sub firing to the back.Currently, I have some crap boston coaxils in the doors and 5x8&#039;s in the stock location behind the rear bench. I will be deleting the rear fill and going with 2-ways up front.For the front I have ordered 4 Adire extremis 6&#039;s(to get a 4ohm load) which I plan to x-over at 3.5khz. My doors are pretty large with lots of space so I can either run the midwoofers IB or ported @45hz as recomended by adire.1. Should I mount a pair of mids in each door with a tweeter?2. Mount a mid and tweeter in each door and two mids in the front of my center console.3. Make 4 2-ways one in each door and a pair in the center console?I am a newbie at sq or anything other than subs so bear with me.Also could you guys reccomend a tweeter to finish off the 2-ways.thanks</blockquote>

[QUOTE="bent70, post: 551165, member: 556898"] I have a crew cab f-250. I will have a sealed enclosure for my 15" xxx as my center console, with the sub firing to the back. Currently, I have some crap boston coaxils in the doors and 5x8's in the stock location behind the rear bench. I will be deleting the rear fill and going with 2-ways up front. For the front I have ordered 4 Adire extremis 6's(to get a 4ohm load) which I plan to x-over at 3.5khz. My doors are pretty large with lots of space so I can either run the midwoofers IB or ported @45hz as recomended by adire. 1. Should I mount a pair of mids in each door with a tweeter? 2. Mount a mid and tweeter in each door and two mids in the front of my center console. 3. Make 4 2-ways one in each door and a pair in the center console? I am a newbie at sq or anything other than subs so bear with me. Also could you guys reccomend a tweeter to finish off the 2-ways. thanks [/QUOTE]

Verification