Reply to thread

Message

<blockquote data-quote="kfx450r" data-source="post: 5655591" data-attributes="member: 588271">Alright used RE&#039;s box calculator thing for a box for my 3x type Rs and anyone think this would be a good box. in a ext cab midsized truck firing all 3 toward front. It says a 50x22x15, counting in port and all 3 sub volumes, 6.6cu/ft tuned to about high 29/low 30hz. Im going for deep ear rattling bass, but also want it to be nice and clean. Gives each sub about 2.2cuft. Slot PortedOr I can use every space i have an build a 9.2cu ft ported box ported to the same hz but giving each sub about 3 cu/ft eachOr i can make it a little easier to build and get 8.5 out of it and have 2.7 cu/ft for each sub..This is all with the possibility of adding a 4th down the road. So if I built one that was 50x27x16..counting sub displacements..i would get 8.5cu/ft which gives 3x subs 2.8cu/ft eac and 4x 2cu/ft each..still more or equal to spec. Goofy lookin box tho, all tuned to about 30hz</blockquote>

[QUOTE="kfx450r, post: 5655591, member: 588271"] Alright used RE's box calculator thing for a box for my 3x type Rs and anyone think this would be a good box. in a ext cab midsized truck firing all 3 toward front. It says a 50x22x15, counting in port and all 3 sub volumes, 6.6cu/ft tuned to about high 29/low 30hz. Im going for deep ear rattling bass, but also want it to be nice and clean. Gives each sub about 2.2cuft. Slot Ported Or I can use every space i have an build a 9.2cu ft ported box ported to the same hz but giving each sub about 3 cu/ft each Or i can make it a little easier to build and get 8.5 out of it and have 2.7 cu/ft for each sub.. This is all with the possibility of adding a 4th down the road. So if I built one that was 50x27x16..counting sub displacements..i would get 8.5cu/ft which gives 3x subs 2.8cu/ft eac and 4x 2cu/ft each..still more or equal to spec. Goofy lookin box tho, all tuned to about 30hz [/QUOTE]

Verification