Reply to thread

Message: <blockquote data-quote="TaylorFade" data-source="post: 7827392" data-attributes="member: 618111">Umm... ok. You just proved my point.[Edit: that has to be anechoic testing. Interesting to note though that the SPLtot is actually a tad higher above "tuning" or Fb even in an anechoic environment with no cabin or room gain to speak of and rising to upwards of 15 flippin ohms. Also curious where the 1,000w total power measurement was taken on that plot because if it was at 30hz where impedance was 2.5 or so; it would be interesting to know where the output was rising to 15ohms around 45hz and maintaining the same SPL.]</blockquote>

Top