Reply to thread

Message: <blockquote data-quote="CeleronXXX" data-source="post: 8347766" data-attributes="member: 664453"><p>I have decided to tackle these boxes on my own.  I have access to a wood shop at work so I should have all the tools I need.  After many mock ups and failures I finally found dimensions that will get me two boxes that will both fit in my trunk.  I came up with 19w 16h 24l.  This will give me 3.3 cubes using 3/4 mdf.  I also came to a port size of 2.5x 14.5 x 19.  That should give me 3 net at 35hz.  Does this look good and is it ok to have a box so much longer than wide and is it also okay to not have the port in the shape of an L an instead just running parallel with the on wall? Boxes are for Sa15s btw</p></blockquote><p></p>

Top