Reply to thread

Message

<blockquote data-quote="Arythael" data-source="post: 7681763" data-attributes="member: 640311">Done. I&#039;m not sure how IMing (or buying/selling, for that matter) works on this site, but I&#039;d be happy to discuss some amp options!At this point, I&#039;ve pretty much decided on the CDT CL-61A.2-25 PRO set (mylows, I added you as a contact too), probably running on an MB Quart ONX4.80 amp.Looking at subs, I&#039;ve narrowed it down a lot but I&#039;m having a tough time deciding between the Obsidian 12&quot; or the SSA DCON 12&quot; D4. They&#039;re both about the same price, and obviously the 600W Obsidians are twice the power of the DCONs but from what I&#039;ve read that doesn&#039;t necessarily mean twice as loud... so I&#039;m wondering what people think of each? Does one sound noticeably better than the other (I know enclosures matter here too)? The biggest problem I see is that I&#039;ve been able to find very few mono block amps that can handle 1200W+ for under $200; currently the MB Quart ONX1.1500D is the only one on my list, and that&#039;s 1000W @ 2-Ohm, 1500W @ 1-Ohm. If I get two 4-Ohm DVC subs, is it possible to bridge/wire them to run at 1 Ohm? Does the amp need to be able to specifically support this feature, or can any do it?</blockquote>

[QUOTE="Arythael, post: 7681763, member: 640311"] Done. I'm not sure how IMing (or buying/selling, for that matter) works on this site, but I'd be happy to discuss some amp options! At this point, I've pretty much decided on the CDT CL-61A.2-25 PRO set (mylows, I added you as a contact too), probably running on an MB Quart ONX4.80 amp. Looking at subs, I've narrowed it down a lot but I'm having a tough time deciding between the Obsidian 12" or the SSA DCON 12" D4. They're both about the same price, and obviously the 600W Obsidians are twice the power of the DCONs but from what I've read that doesn't necessarily mean twice as loud... so I'm wondering what people think of each? Does one sound noticeably better than the other (I know enclosures matter here too)? The biggest problem I see is that I've been able to find very few mono block amps that can handle 1200W+ for under $200; currently the MB Quart ONX1.1500D is the only one on my list, and that's 1000W @ 2-Ohm, 1500W @ 1-Ohm. If I get two 4-Ohm DVC subs, is it possible to bridge/wire them to run at 1 Ohm? Does the amp need to be able to specifically support this feature, or can any do it? [/QUOTE]

Verification