Reply to thread

Message: <blockquote data-quote="Cm_low" data-source="post: 8548951" data-attributes="member: 671764">Those specs are not correct.  That is a 600w rms amp and 1200w peak.  Each channel is 2 ohm stable which means the most you will see on each channel is 150watts rms unless you bridge across 2 channels @4ohm then you will be combining those channels power and outputting 300 watts.  I see what you mean from their specs but those are incorrect.  They even state the peak (maximum) power is 1200 watts but then contradict themselves with that 300 x4 rms statement.  Also dual is another company that inflates their numbers  so I doubt you would even see that 600 watts of total rms power from it.All and all you should be safe.</blockquote>

Top