Reply to thread

Message

<blockquote data-quote="LetMyBeatPound" data-source="post: 8631120" data-attributes="member: 673630"><p>I have, the only thing different from stock wiring is the acc. power and reg. power because the original radio acc. and reg power didn&#039;t work. So I tapped into the cigarette lighter and hatch pop switch. I have to power the HU off and back on to get it back on, if I don&#039;t change the volume and just reset it, it plays for a few seconds and amp shuts off again. Could it possibly be voltage drop causing it to do this? It hardly ever drops below 13v tho normally stays around 14v but when this happens it is dropping into the 12s I just noticed. The guys who I bought the stinger voltage meter from said they weren&#039;t very accurate tho. When I pull it apart to move&nbsp; my I&#039;ve my volt meter and put my Bluetooth mic in I&#039;ll check again. I&#039;m wondering if one of the of the copper winding things inside the amp is grounding itself out but it&#039;s weird cuz wouldn&#039;t the protect light go on instread if no power at all</p></blockquote><p></p>

[QUOTE="LetMyBeatPound, post: 8631120, member: 673630"] I have, the only thing different from stock wiring is the acc. power and reg. power because the original radio acc. and reg power didn't work. So I tapped into the cigarette lighter and hatch pop switch. I have to power the HU off and back on to get it back on, if I don't change the volume and just reset it, it plays for a few seconds and amp shuts off again. Could it possibly be voltage drop causing it to do this? It hardly ever drops below 13v tho normally stays around 14v but when this happens it is dropping into the 12s I just noticed. The guys who I bought the stinger voltage meter from said they weren't very accurate tho. When I pull it apart to move my I've my volt meter and put my Bluetooth mic in I'll check again. I'm wondering if one of the of the copper winding things inside the amp is grounding itself out but it's weird cuz wouldn't the protect light go on instread if no power at all [/QUOTE]

Verification