Reply to thread

Message

<blockquote data-quote="ImSoNew0rleans" data-source="post: 7325937" data-attributes="member: 633084">Bare with me, This is my first time installing audio........noob question.....Any videos or tutorials on how I would convert the white connector to the component speakers wiresI removed the factory speaker and it was attached to a white connector that was hooked in, the component speaker only has 2 silver sides , positive and negative...It came some wires for each speaker to, the wire has 2 plastic caps on 1 side and the other side is 2 silver wires sticking out of the wires........I thought I had everything I needed except for a drill so I could adjust the speaker fitting but it looks like I&#039;m going to need some tools to convert the white connector wires to work with the component speakers huh?Right now I have nothing installed, so I&#039;m assuming I would hook up the HU first, that should be nothing... ( found many different video tutorials on installing headunits, should be easy)Then the amp? or speakers with crossovers?Oh ya, what about the mounting? I don&#039;t have no board to mount the amp on, the MB Quart ONX4.125 is a big mofo...it prolly would still fit under the seat or behind the backseat...I would have to mount the crossovers to ehCan one of yall guide me in the right direction?really starting to pi$$ me off, but I refuse to pay someone when I know I can do the same job for free with a little more research.</blockquote>

[QUOTE="ImSoNew0rleans, post: 7325937, member: 633084"] Bare with me, This is my first time installing audio.... ....noob question..... Any videos or tutorials on how I would convert the white connector to the component speakers wires I removed the factory speaker and it was attached to a white connector that was hooked in, the component speaker only has 2 silver sides , positive and negative... It came some wires for each speaker to, the wire has 2 plastic caps on 1 side and the other side is 2 silver wires sticking out of the wires..... ...I thought I had everything I needed except for a drill so I could adjust the speaker fitting but it looks like I'm going to need some tools to convert the white connector wires to work with the component speakers huh? Right now I have nothing installed, so I'm assuming I would hook up the HU first, that should be nothing... ( found many different video tutorials on installing headunits, should be easy) Then the amp? or speakers with crossovers? Oh ya, what about the mounting? I don't have no board to mount the amp on, the MB Quart ONX4.125 is a big mofo...it prolly would still fit under the seat or behind the backseat... I would have to mount the crossovers to eh Can one of yall guide me in the right direction? [B]really starting to pi$$ me off, but I refuse to pay someone when I know I can do the same job for free with a little more research.[/B] [/QUOTE]

Verification