Reply to thread

Message

<blockquote data-quote="Eclipsed ION" data-source="post: 2849152" data-attributes="member: 575610">So you want it to be rather large. and vented.&nbsp; well, personally i would make it dual chamber incase anything happens to 1 sub, the other will NOT get damaged because of it. (of course more detail needed if u don&#039;t know what i mean.)Well i figured 26 x 46 x 13.5&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; (external dim)w/ 2 ports 12 x 2 x&nbsp; 13.2 each.This would&nbsp; be a 7.571 cu^ft.&nbsp; box&nbsp; w/&nbsp; 6.765 internal volume(after chamber wall, port volume and sub volume)Box is Tuned to 35Hz&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Cut-off Freq. -&nbsp;&nbsp; 28.64 HzBox Parts (Square Prism)1 Top, 1 Bottom:&nbsp; 13.5 © x 46 (b) in&nbsp; &nbsp;&nbsp; 0.75 (thick) in1 Front, 1 Back:&nbsp; 24.5 (a) x 44.5 (d) in&nbsp;&nbsp; 0.75 (thick) in2 Sides:&nbsp; 24.5 (a) x 13.5 © x 0.75 (thick) in1 Center Wall: 24.5 x&nbsp; 12 x&nbsp; 0.75 (thick) inVent Parts2 Sides:&nbsp; 12 (g) x&nbsp; 12.45 (h) x 0.75 (thick) in&nbsp;&nbsp; (remeber to&nbsp; edges by sanding.Designed to be 26&quot; high 46&quot; wide and 13.5&quot; deep (external dimensions)w/ 2 chambers 1 port in each&nbsp;&nbsp; Tuned @ 35 Hz.&nbsp; &nbsp; (range 30 Hz - 100) just finePorts vent at top, in center.&nbsp; (Both use Chamber Wall)</blockquote>

[QUOTE="Eclipsed ION, post: 2849152, member: 575610"] So you want it to be rather large. and vented. well, personally i would make it dual chamber incase anything happens to 1 sub, the other will NOT get damaged because of it. (of course more detail needed if u don't know what i mean.) Well i figured 26 x 46 x 13.5 (external dim) w/ 2 ports 12 x 2 x 13.2 each. This would be a 7.571 cu^ft. box w/ 6.765 internal volume (after chamber wall, port volume and sub volume) Box is Tuned to 35Hz Cut-off Freq. - 28.64 Hz Box Parts (Square Prism) 1 Top, 1 Bottom: 13.5 © x 46 (b) in 0.75 (thick) in 1 Front, 1 Back: 24.5 (a) x 44.5 (d) in 0.75 (thick) in 2 Sides: 24.5 (a) x 13.5 © x 0.75 (thick) in 1 Center Wall: 24.5 x 12 x 0.75 (thick) in Vent Parts 2 Sides: 12 (g) x 12.45 (h) x 0.75 (thick) in (remeber to edges by sanding. Designed to be 26" high 46" wide and 13.5" deep (external dimensions) w/ 2 chambers 1 port in each Tuned @ 35 Hz. (range 30 Hz - 100) just fine Ports vent at top, in center. (Both use Chamber Wall) [/QUOTE]

Verification