Reply to thread

Message: <blockquote data-quote="dman4486" data-source="post: 5871282" data-attributes="member: 585160"><p>nice write up, however I know most of what you posted....my question was intended to be more of a, "will the motor handle 2kw when I want to push it that far". I have 2400wrms@2ohm(birthsheet) from a pair of amps strapped, but what I did not know was what the imp rise would be of the q15 through the freq. range.  I have however measured individual coils of the d2(for when I run a pair) driver at rest to be 1.5ohm on the dot and the d1 to be .72, so I will already be pushing the limits of min. impedance.(which I am willing to allow due to imp rise)</p></blockquote><p></p>

Top