Reply to thread

Message

<blockquote data-quote="Rashaddd" data-source="post: 5043984" data-attributes="member: 592162"><img src="http://img242.imageshack.us/img242/9775/trunkpic1lx7.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="http://img402.imageshack.us/img402/8357/trunkpic2ge9.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Ports are 6&quot; aero&#039;s and will be coming out of the rear deck, which will eventually be a fiberglass enclosure for them, but for now will just be made of wood and carpeted or vinyled, dont worry the ports will be flush with the rear deck covering I&#039;ll make basically, the pics just show the actual sub enclosure9.5 cubes after all displacements including amp rack, tuned to around 28hz, might end up going higher more like 32-34. Amp rack will have plexiglass over it, and I&#039;ll most likely add a couple fans to the sides of the amp rack and vents for them to be constantly moving air through itI was planning on using threaded rods to brace everywhere, probably 3 or 4 going every direction bracing every big wall, should that be enough? I know its only 56 sq in of port area but these aren&#039;t huge displacement or power subs and the flares should take care of port noise, winISD shows a port velocity of .05 machanyway...jsut lookin for opinions, already have the baffle built and floor cutout as well as one side, been kinda workin on this for a couple days now, took out my old boxes last fridayI&#039;ll post a build log when I&#039;m done, been takin pics</blockquote>

[QUOTE="Rashaddd, post: 5043984, member: 592162"] [IMG]http://img242.imageshack.us/img242/9775/trunkpic1lx7.jpg[/IMG] [IMG]http://img402.imageshack.us/img402/8357/trunkpic2ge9.jpg[/IMG] Ports are 6" aero's and will be coming out of the rear deck, which will eventually be a fiberglass enclosure for them, but for now will just be made of wood and carpeted or vinyled, dont worry the ports will be flush with the rear deck covering I'll make basically, the pics just show the actual sub enclosure 9.5 cubes after all displacements including amp rack, tuned to around 28hz, might end up going higher more like 32-34. Amp rack will have plexiglass over it, and I'll most likely add a couple fans to the sides of the amp rack and vents for them to be constantly moving air through it I was planning on using threaded rods to brace everywhere, probably 3 or 4 going every direction bracing every big wall, should that be enough? I know its only 56 sq in of port area but these aren't huge displacement or power subs and the flares should take care of port noise, winISD shows a port velocity of .05 mach anyway...jsut lookin for opinions, already have the baffle built and floor cutout as well as one side, been kinda workin on this for a couple days now, took out my old boxes last friday I'll post a build log when I'm done, been takin pics [/QUOTE]

Verification