Reply to thread

Message: <blockquote data-quote="ramos" data-source="post: 266059" data-attributes="member: 540858"><p>I would say your on the right track. I would go to wal mart and get you some fleece for your first layer. It's a little thicker so it holds more resin. Before you remove it from your truck. You will need to add a layer of mat and or cloth depending on what your using. To make the enclosure stiff enough to remove it without it breaking apart on you. I diagree with making it really thick. It really depends on what kind and weoght of mat/ cloth your using. It's all in the bracing, and how well you sqeeze the air bubbles out. An easy way of bracing glass is to use rope. After your first layer of glass. Soak some rope in resin, then lay it on the inside sides to make stiffening ribs. Then just glass over top the rope with your next layer(s).   //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif</p></blockquote><p></p>

Top