Reply to thread

Message: <blockquote data-quote="req" data-source="post: 686964" data-attributes="member: 555713">um. you can try adhesion promoter - its like a spraypaint chemical. you can get it at any store that sells spraypaint.first of all, you are going to want to sand that surface a little bit. i would tape off the area you want to stay clear on the box (at LEAST 3" from the edge of the plexi), then i would sand that  3" so its quite rough and a good surface to stick to. then id spray the adhesion promoter. then i would set up all the plexiglass how i wanted it - and then fiberglass everything how its supposed to go.if this is your first time fiberglassing. i can almost guarentee its not going to turn out great. id practice with some wood before ruining $100+ of plexi.</blockquote>

Top