Reply to thread

Message: <blockquote data-quote="ramos" data-source="post: 4219237" data-attributes="member: 540858"><p>Mat = quicker build up as mat is usually sold in heavier weights than cloth. Cloth tends to conform better to the tighter curves. If you plan on building enclosures with it. I would look into some of the heavier biaxial mats  ( biaxial mats are heavy arse roving with lighter weight mat stitched to it ) it's more expensive per yard. But you actually end up saving money in the end because you use less. There used to be a picture I made floating around on this forum of a car parked on top of an enclosure I made with 4 layers of of 20oz kyntex biaxial mat. The chit is strong . Also if your laying mat on the outside of your enclosure , a layer of cloth for the final layer tends to make finishing a little easier. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif</p></blockquote><p></p>

Top