Reply to thread

Message: <blockquote data-quote="Create xero" data-source="post: 7818448" data-attributes="member: 642542"><p>I am building ported box and I'm trying to resin the inside so that it is smooth and I used liquid nails to glue the pieces together and then laid down a thin coat of resin and its not drying in the corners covered in liquid nail so then i double coated and its still not drying (24 hours) but the rest is very dry only the corners is that a common problem or am I missing something. Also any other suggestions would be duly noted. Inb4 hardener Inb4 something is grammatically wrong Inb4 OP can't Inb4.</p></blockquote><p></p>

Top