Reply to thread

Message

<blockquote data-quote="ramos" data-source="post: 3162774" data-attributes="member: 540858">1) make the MDF skeleton.. including MDF mount rings and Braced and Portyep2) cover with the Fleece material and make it smoothStretch it until all wrinkles are gone , wrinkle in the fleece now will be a pain in your rear later3) add the hardener/resin and make it strong and dry and smooth as possiblesaturate the ever loving poo poo out of the fleece ( or what ever mold fabric you use ) 4) Trim, Body filler, sand, sand, and make a smooth and clear shell to paintnope , step four should be reinforcing your gigantic resin coated fleece blob with mat and or cloth. Considering your talking about a huge fugging enclosure, your gonna need several layers. THen you go on to step your step four 4) Trim, Body filler, sand, sand, and make a smooth and clear shell to paintsmooth is the key , you will be sanding for ever if your looking for it to be clear. Resin and mat isn&#039;t clear from the get go 5) Paint and install//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif</blockquote>

[QUOTE="ramos, post: 3162774, member: 540858"] 1) make the MDF skeleton.. including MDF mount rings and Braced and Port [COLOR=Magenta]yep[/COLOR] 2) cover with the Fleece material and make it smooth [COLOR=magenta]Stretch it until all wrinkles are gone , wrinkle in the fleece now will be a pain in your rear later[/COLOR] 3) add the hardener/resin and make it strong and dry and smooth as possible [COLOR=magenta]saturate the ever loving poo poo out of the fleece ( or what ever mold fabric you use ) [/COLOR] 4) Trim, Body filler, sand, sand, and make a smooth and clear shell to paint [COLOR=magenta]nope , step four should be reinforcing your gigantic resin coated fleece blob with mat and or cloth. Considering your talking about a huge fugging enclosure, your gonna need several layers. THen you go on to step your step four [/COLOR] 4) Trim, Body filler, sand, sand, and make a smooth and clear shell to paint [COLOR=magenta]smooth is the key , you will be sanding for ever if your looking for it to be clear. Resin and mat isn't clear from the get go [/COLOR] 5) Paint and install [IMG]//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif[/IMG] [/QUOTE]

Verification