Reply to thread

Message: <blockquote data-quote="req" data-source="post: 1393614" data-attributes="member: 555713">well, lay the fleec\fabric on, and let it dry and see if its strong enough. you could always try and use fiberglass filler [fumed silicia or similar] to make it into a paste so you can scoop it with your hands and apply that to the inside for more strength.but first see if its strong enough. and if its not - then figure somthing out, if it is, then dont worry about it, your finish [bodyfiller, ect] will smooth it out and strengthen it a little more [thats if you arent carpeting it].honestly man, an 8 will have very little pressure behind it, and obviously the structure is non-load-bearing. so i wouldnt worry about it too much.</blockquote>

Top