Reply to thread

Message

<blockquote data-quote="blazinlow" data-source="post: 2259609" data-attributes="member: 570746"><p>ok guys. few questions regarding these subs. looking at going with 2 of the 18 inch ssds dual 1 ohm vc. first question is im putting them in a 86 2 door blazer and from my calculations the largest box i can fit without and major caculations/ fancy cutting is gonna be 11 cubic feet before driver displacement and port. fi is recommending 6-10 cubic feet. is this gonna be a problem and if so what kinda size sealed box would work well. i could go with the 15s but with such little price diffrance it just dont make sense. second question is i currenty have one alpine v12mrd-m1005 mono block rated at 700x1 at 2 ohms and 12vs so&nbsp; i plan to buy one more and run one for each sub. will these amps have enough grunt for this setup??&nbsp; ok and finally last question lol. i have considered selling this anp i already have but i also have a mrv-f345 4 channel v12 also so i would like them all to match. what would you guys recommend as far as front stage to maximize this 4 channel. its only rated at 50x4 at 12vs and i do not think i can bridge it into 2 channels only 3 so im thinking a componant set thats bi ampable like the type xs maybe??&nbsp;&nbsp; thx</p></blockquote><p></p>

[QUOTE="blazinlow, post: 2259609, member: 570746"] ok guys. few questions regarding these subs. looking at going with 2 of the 18 inch ssds dual 1 ohm vc. first question is im putting them in a 86 2 door blazer and from my calculations the largest box i can fit without and major caculations/ fancy cutting is gonna be 11 cubic feet before driver displacement and port. fi is recommending 6-10 cubic feet. is this gonna be a problem and if so what kinda size sealed box would work well. i could go with the 15s but with such little price diffrance it just dont make sense. second question is i currenty have one alpine v12mrd-m1005 mono block rated at 700x1 at 2 ohms and 12vs so i plan to buy one more and run one for each sub. will these amps have enough grunt for this setup?? ok and finally last question lol. i have considered selling this anp i already have but i also have a mrv-f345 4 channel v12 also so i would like them all to match. what would you guys recommend as far as front stage to maximize this 4 channel. its only rated at 50x4 at 12vs and i do not think i can bridge it into 2 channels only 3 so im thinking a componant set thats bi ampable like the type xs maybe?? thx [/QUOTE]

Verification