Reply to thread

Message: <blockquote data-quote="NDMstang65" data-source="post: 5460313" data-attributes="member: 544576">Just because it can "run" at .5ohm does not mean that you need to do it. It's something many people do not understand from an electricity standpoint (Your trying to put out twice as much current than voltage into the coil, current means more heat builds up more heat in the coils and more heat in the amp...simply is not a good idea)Shoot for dual 2's, the DCR is actually 1.4ohms. You'll be good to go if you wire them in parallel.</blockquote>

Top