Reply to thread

Message

<blockquote data-quote="pcoastsurf" data-source="post: 3181230" data-attributes="member: 575121">Like new thing sounds awesome comes in original box ,with manual250&nbsp; shippedLRx 1.400 is a mono amplifier especially designed to drive very low loads with thrilling energy reserve, built-in active filters and LRx typical compact size. Power supply and final stages use high current MOSFETs, which satisfy every power need. With its 900 watts at 1 Ohm, LRx 1.400 is the ideal amplifier to drive state-of-the-art subwoofers systems and to realise installations with very high SPL values and excellent timbre quality. It has a Hi-Pass stereo filter and a 24dB/Oct. Lo-Pass mono one; both are Butterworth, with independent adjustments. The subwoofer section has a bypass subsonic filter and a 24dB/Oct. slope one with Q factor adjustment and phase switch; thus, it always allows you to take full advantage of any speaker you are using.• Limit Led• On/Off Led• Safety Led• Subsonic Bypass• Output level adjustment• Phase inverter (0°-180°)• F1Q: Lo-Pass filter Q factor adjustment• Crossover frequencies adjustment:Hi/Bypass, Lo/Bypass</blockquote>

[QUOTE="pcoastsurf, post: 3181230, member: 575121"] Like new thing sounds awesome comes in original box ,with manual 250 shipped LRx 1.400 is a mono amplifier especially designed to drive very low loads with thrilling energy reserve, built-in active filters and LRx typical compact size. Power supply and final stages use high current MOSFETs, which satisfy every power need. With its 900 watts at 1 Ohm, LRx 1.400 is the ideal amplifier to drive state-of-the-art subwoofers systems and to realise installations with very high SPL values and excellent timbre quality. It has a Hi-Pass stereo filter and a 24dB/Oct. Lo-Pass mono one; both are Butterworth, with independent adjustments. The subwoofer section has a bypass subsonic filter and a 24dB/Oct. slope one with Q factor adjustment and phase switch; thus, it always allows you to take full advantage of any speaker you are using. • Limit Led • On/Off Led • Safety Led • Subsonic Bypass • Output level adjustment • Phase inverter (0°-180°) • F1Q: Lo-Pass filter Q factor adjustment • Crossover frequencies adjustment: Hi/Bypass, Lo/Bypass [/QUOTE]

Verification