Reply to thread

Message

<blockquote data-quote="Trepkos" data-source="post: 4391553" data-attributes="member: 577103">Behind the seat in a Regular Cab Truck F-150.This is what I need:- 3-3.5ft^3 Internal Air Volume- 1.5-1.75ft^3 Internal Air Volume Per Chamber- Sealed(No Vents/No Ports)- Box Terminals on both sides.- 6.7&quot; - 7.5&quot; Mounting Depth(Thats without the inch and a half of breathing room from the magnet.)-&nbsp; This is what is going in it. <a href="http://www.sonicelectronix.com/item_6513_Kicker+06CVX124+CompVX+Series.html" target="_blank">Kicker 12&quot; DVC 4-Ohm CompVX</a>This is the room I&#039;m working with. If I have to, I will cut out the side panels...back-cloth layer and into the seat some....But Im not going blow through.<a href="http://img524.imageshack.us/img524/460/dscn0917ae3.jpg" target="_blank">Behind the Seat</a></blockquote>

[QUOTE="Trepkos, post: 4391553, member: 577103"] Behind the seat in a [B]Regular Cab Truck F-150[/B]. This is what I need: - 3-3.5ft^3 Internal Air Volume - 1.5-1.75ft^3 Internal Air Volume Per Chamber - Sealed(No Vents/No Ports) - Box Terminals on both sides. - 6.7" - 7.5" Mounting Depth(Thats without the inch and a half of breathing room from the magnet.) - This is what is going in it. [URL="http://www.sonicelectronix.com/item_6513_Kicker+06CVX124+CompVX+Series.html"]Kicker 12" DVC 4-Ohm CompVX[/URL] This is the room I'm working with. If I have to, I will cut out the side panels...back-cloth layer and into the seat some....But Im not going blow through. [URL="http://img524.imageshack.us/img524/460/dscn0917ae3.jpg"]Behind the Seat[/URL] [/QUOTE]

Verification