Reply to thread

Message: <blockquote data-quote="FenixAudio" data-source="post: 7002013" data-attributes="member: 622195"><p>Check voltage at amp and decks amp to wire, also if u are running more then 2 amps you should use a relay to turn them on...if the monitor is connected to the amp to wire you def need a relay. Use a meter, also a prior post stated a fuse might be on its way out...fuses either blow or don't....forget the factory fuses also unless something factory isn't working. I'm gonna bet you need more current to run the third amp...just check your voltage and go from there</p></blockquote><p></p>

Top