Reply to thread

Message

<blockquote data-quote="Kingsuv" data-source="post: 6772175" data-attributes="member: 587503">So I did some thinking out loud today. Was trying to decide what I was going to need for wire so I can order some up. But I need to decide how it is going to enter into the truck and where. 16 subs will eat up a good amount of room in the back so it will really limit on where I can put the amps. I was thinking of dividing them 4 and 4 on the front and rear of the box molded into the box. The front won&#039;t be too bad, but the rear may be a pain with the addition of the port. The other idea is to do them under the box. Not the best way to show them off but I was thinking about a pull out tray for the 4 in the rear.8 HF-2500.1 really don&#039;t take up too much room once I laid them out.<img src="http://i59.photobucket.com/albums/g290/kingsuv/Diablo%20Audio/001-6.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />At any rate, it&#039;s a good amount of wire from the alts to the battery racks and then to the amps. The trick will be figuring out how to feed all 8 amps from the batteries under the truck along the frame rails.</blockquote>

[QUOTE="Kingsuv, post: 6772175, member: 587503"] So I did some thinking out loud today. Was trying to decide what I was going to need for wire so I can order some up. But I need to decide how it is going to enter into the truck and where. 16 subs will eat up a good amount of room in the back so it will really limit on where I can put the amps. I was thinking of dividing them 4 and 4 on the front and rear of the box molded into the box. The front won't be too bad, but the rear may be a pain with the addition of the port. The other idea is to do them under the box. Not the best way to show them off but I was thinking about a pull out tray for the 4 in the rear. 8 HF-2500.1 really don't take up too much room once I laid them out. [IMG]http://i59.photobucket.com/albums/g290/kingsuv/Diablo%20Audio/001-6.jpg[/IMG] At any rate, it's a good amount of wire from the alts to the battery racks and then to the amps. The trick will be figuring out how to feed all 8 amps from the batteries under the truck along the frame rails. [/QUOTE]

Verification