Reply to thread

Message

<blockquote data-quote="Phreakshow" data-source="post: 3724648" data-attributes="member: 583907"><p>I have all my wires soldered,shrink wrapped to my harness&#039;s and ready to go.&nbsp; After work tommorow I will install it in my dash.&nbsp; In the box they gave me some odd little pieces.&nbsp; The manual says they are for screwing the face plate on the unit so it doesnt fall off.&nbsp; Are you supposed to use these?&nbsp; Also in my 02 Jeep Wrangler I dont have anywhere to run a strap.&nbsp; Even if I did how do you connect it to the car and then to the deck?&nbsp; I have no way of gettiong behind the dash.&nbsp; I know Circuit city didn&#039;t use one when they installed my old pioneer HU.&nbsp; I had HUGE problems with CD&#039;s skipping so I stuffed some foam padding under the metal cage the HU slides into to help support it.&nbsp; A more solid material would be better but I dont know what I would use.&nbsp; Is this a reasonable fix or would you think that is bad to do?&nbsp; Any help is greatly appreciated.</p></blockquote><p></p>

[QUOTE="Phreakshow, post: 3724648, member: 583907"] I have all my wires soldered,shrink wrapped to my harness's and ready to go. After work tommorow I will install it in my dash. In the box they gave me some odd little pieces. The manual says they are for screwing the face plate on the unit so it doesnt fall off. Are you supposed to use these? Also in my 02 Jeep Wrangler I dont have anywhere to run a strap. Even if I did how do you connect it to the car and then to the deck? I have no way of gettiong behind the dash. I know Circuit city didn't use one when they installed my old pioneer HU. I had HUGE problems with CD's skipping so I stuffed some foam padding under the metal cage the HU slides into to help support it. A more solid material would be better but I dont know what I would use. Is this a reasonable fix or would you think that is bad to do? Any help is greatly appreciated. [/QUOTE]

Verification