Reply to thread

Message

<blockquote data-quote="ericnord" data-source="post: 5081828" data-attributes="member: 560194">Ok, I&#039;ll have pics later, but as of right now judgement day didn&#039;t turn out so well. I have the amp rack in and all pwr/grnd/rmt/rca/Ai-Net wires run and all the amps and PXA-H100 are getting a good 12v w/ the car on, but engine off. Problem is I&#039;m not getting any signal&nbsp; I know this because when I went to set gain on amps I only get milivolts at 75% volume out of the speaker terminals, so I plugged in a speaker and there is nothing.So it seems I need to troubleshoot the signal system, so I have 9886 giving signal to H100 through the Ai-Net. There are no RCAs connected to the 9886. The 9886 sees the H100 because the expanded Imprint options appear. The H100 is giving signal to the amps through some Monster Home Theatre RCA (didn&#039;t have time to make my own yet). This seems pretty simple, so I&#039;m assuming there is a setting or dip switch somewhere that is not correct. I left the dips on the 9886 at Norm instead of the Ext AP (or whatever it is).Any ideas here?</blockquote>

[QUOTE="ericnord, post: 5081828, member: 560194"] Ok, I'll have pics later, but as of right now judgement day didn't turn out so well. I have the amp rack in and all pwr/grnd/rmt/rca/Ai-Net wires run and all the amps and PXA-H100 are getting a good 12v w/ the car on, but engine off. Problem is I'm not getting any signal I know this because when I went to set gain on amps I only get milivolts at 75% volume out of the speaker terminals, so I plugged in a speaker and there is nothing. So it seems I need to troubleshoot the signal system, so I have 9886 giving signal to H100 through the Ai-Net. There are no RCAs connected to the 9886. The 9886 sees the H100 because the expanded Imprint options appear. The H100 is giving signal to the amps through some Monster Home Theatre RCA (didn't have time to make my own yet). This seems pretty simple, so I'm assuming there is a setting or dip switch somewhere that is not correct. I left the dips on the 9886 at Norm instead of the Ext AP (or whatever it is). Any ideas here? [/QUOTE]

Verification