Reply to thread

Message

<blockquote data-quote="spin dB" data-source="post: 2257137" data-attributes="member: 571349">I am looking to run an EQ.&nbsp; I am looking to have an Eclipse 21010 EQ or possibly a Soundstream MPQ-6XO EQ, either or but I am going to mount this in the 1/2 din section under my HU.&nbsp; I am then going to have it run to a 30 band Eclipse 2102 Parametric EQ.&nbsp; From there I am going to run into my Line Driver and finally into my amps, I am looking at having about 34Vrms pre-out signal when it is all said and done.I first want to know if anyone has done something this crazy and if so what problems you had, if any.&nbsp; Theroedically this should not cause a problem, provided the amp gain the LD gain and the settings on the EQ&#039;s are correct!, this would however allow me to same all my midstage equipment by setting the eq&#039;s to do the work for me.Finally does anyone have any other suggestions on the EQ&#039;s that I should be looking at?</blockquote>

[QUOTE="spin dB, post: 2257137, member: 571349"] I am looking to run an EQ. I am looking to have an Eclipse 21010 EQ or possibly a Soundstream MPQ-6XO EQ, either or but I am going to mount this in the 1/2 din section under my HU. I am then going to have it run to a 30 band Eclipse 2102 Parametric EQ. From there I am going to run into my Line Driver and finally into my amps, I am looking at having about 34Vrms pre-out signal when it is all said and done. I first want to know if anyone has done something this crazy and if so what problems you had, if any. Theroedically this should not cause a problem, provided the amp gain the LD gain and the settings on the EQ's are correct!, this would however allow me to same all my midstage equipment by setting the eq's to do the work for me. Finally does anyone have any other suggestions on the EQ's that I should be looking at? [/QUOTE]

Verification