Reply to thread

Message

<blockquote data-quote="hairbandlover" data-source="post: 4267252" data-attributes="member: 588484">OK I finally am grasping the EQ parameters on my Aline 9831. After 4 yrs of just using factory eq settings I figured out I was losing out on sound quality. How sad I am! Here are how the settings are labeled&quot;Band Freq:Band 1 40Hz,60Hz,90Hz, BassBand 2 100Hz,150Hz,200Hz, Mid BassBand 3 500Hz,700Hz,1kHz,2kHz,4kHz,6kHz, Mid HighBand 4 10kHz,12.5kHz,15kHz, Center HighBand Width (Q)Band 1 1.0, 2.0, 3.0 BassBand 2 1.0, 1.5, 2.0 Mid BassBand 3 1.0, 2.0, 3.0 Mid HighBand 4 1.0 fixed width Center HighI can then in turn adjust the freq level to my liking. My question is with the band width curve currently I am set at 1=1.0, 2=1.5, 3=1.0, 4=fixed. Is this a large curve&nbsp; or short curve? And what is recommended? I also am a bit curious on the Mid High freq I am at 2 k now but again not sure if I am losing anything. I had the HP &amp;amp; LP filters off but found better quality at 80Hz for both. I am trying to achieve a very rich sound at mid volume level with this EQ setting I have the freq levels all in the +. My second user EQ setting is a bit tamer so I can hit the high end of the volume without distortion. Any input on better understanding the curve would be great!! Thanks<img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite7" alt=":p" title="Stick out tongue&nbsp; &nbsp; :p" loading="lazy" data-shortname=":p" />:</blockquote>

[QUOTE="hairbandlover, post: 4267252, member: 588484"] OK I finally am grasping the EQ parameters on my Aline 9831. After 4 yrs of just using factory eq settings I figured out I was losing out on sound quality. How sad I am! Here are how the settings are labeled" Band Freq: Band 1 40Hz,60Hz,90Hz, Bass Band 2 100Hz,150Hz,200Hz, Mid Bass Band 3 500Hz,700Hz,1kHz,2kHz,4kHz,6kHz, Mid High Band 4 10kHz,12.5kHz,15kHz, Center High Band Width (Q) Band 1 1.0, 2.0, 3.0 Bass Band 2 1.0, 1.5, 2.0 Mid Bass Band 3 1.0, 2.0, 3.0 Mid High Band 4 1.0 fixed width Center High I can then in turn adjust the freq level to my liking. My question is with the band width curve currently I am set at 1=1.0, 2=1.5, 3=1.0, 4=fixed. Is this a large curve or short curve? And what is recommended? I also am a bit curious on the Mid High freq I am at 2 k now but again not sure if I am losing anything. I had the HP & LP filters off but found better quality at 80Hz for both. I am trying to achieve a very rich sound at mid volume level with this EQ setting I have the freq levels all in the +. My second user EQ setting is a bit tamer so I can hit the high end of the volume without distortion. Any input on better understanding the curve would be great!! Thanks:p: [/QUOTE]

Verification