Reply to thread

Message

<blockquote data-quote="psych0ticnemes1" data-source="post: 2467351" data-attributes="member: 560430">I have a few weird issues.Equipment:Pioneer DEH6800MPJBL 180.2Polk db 6.5 coax&#039;svoltage is at 13.6-13.9 constant when drivingFirst... i installed a jbl 180.2 for my fronts. It has been hooked up for months. I decided to try my fronts off my deck yesturday to find out... they are as loud if not louder off of the deck. Settings are completely the same. I had the jbl on half gain and it still wasn&#039;t quite as loud.I&#039;ve tried an orion 1200d, PG xenon 600.1, mtx 1501d and they all seem to need to have the gain on 3/4 or more to do decent power. However, a kicker zx750.1 doesn&#039;t need the gain past 1/3 to do its power.I have set my gain with a dmm and the gain doesn&#039;t need to be up that high to reach the voltage, but it isn&#039;t loud at all.What are some ways to check my entire elec with a dmm?thanks</blockquote>

[QUOTE="psych0ticnemes1, post: 2467351, member: 560430"] I have a few weird issues. Equipment: Pioneer DEH6800MP JBL 180.2 Polk db 6.5 coax's voltage is at 13.6-13.9 constant when driving First... i installed a jbl 180.2 for my fronts. It has been hooked up for months. I decided to try my fronts off my deck yesturday to find out... they are as loud if not louder off of the deck. Settings are completely the same. I had the jbl on half gain and it still wasn't quite as loud. I've tried an orion 1200d, PG xenon 600.1, mtx 1501d and they all seem to need to have the gain on 3/4 or more to do decent power. However, a kicker zx750.1 doesn't need the gain past 1/3 to do its power. I have set my gain with a dmm and the gain doesn't need to be up that high to reach the voltage, but it isn't loud at all. What are some ways to check my entire elec with a dmm? thanks [/QUOTE]

Verification