Reply to thread

Message

<blockquote data-quote="squeak9798" data-source="post: 1417573" data-attributes="member: 555320">Some do some don&#039;t.&nbsp; Not many currently in product do.&nbsp;&nbsp; Zapco&#039;s are all that I can think of off hand.&nbsp; And even then Zapco&#039;s require +/- 15V input along with the balanced signal (which is part of the Symbalink system) IIRC.&nbsp; So you can&#039;t just send a balanced input to them, you have to use the symbalink system.But for those that do, it&#039;s pretty obvious.&nbsp; They&#039;ll either have dual RCA inputs per channel (4 instead of 2), or they&#039;ll have mini-Din or XLR inputs (for example) aswell.For example, my Coustic DR amplifiers and Soundstream Rubicons both directly accept balanced inputs.&nbsp; I could run the balanced outs from my Eclipse 8053 directly into my amplifiers without needing to use the BLA.&nbsp; The Coustic&#039;s have dual RCA inputs per channel, and the Rubicon has a mini-Din input.Oh...and my PG EQ232 could both accept and output balanced signals.Sort of.&nbsp; It would just be unnecessary redunancy.&nbsp; Just place the Symbalink transmitters close to the HU, and you&#039;ll run balanced all through the vehicle.&nbsp; No point in spending the //content.invisioncic.com/y282845/emoticons/greedy.gif.5a53e6246569d7ab79867170f3b06629.gif on the BLA to convert balanced to unbalanced, just to input it into the Symbalink system when you could just run unbalanced directly out of the HU to the Symbalink system.</blockquote>

[QUOTE="squeak9798, post: 1417573, member: 555320"] Some do some don't. Not many currently in product do. Zapco's are all that I can think of off hand. And even then Zapco's require +/- 15V input along with the balanced signal (which is part of the Symbalink system) IIRC. So you can't just send a balanced input to them, you have to use the symbalink system. But for those that do, it's pretty obvious. They'll either have dual RCA inputs per channel (4 instead of 2), or they'll have mini-Din or XLR inputs (for example) aswell. For example, my Coustic DR amplifiers and Soundstream Rubicons both directly accept balanced inputs. I could run the balanced outs from my Eclipse 8053 directly into my amplifiers without needing to use the BLA. The Coustic's have dual RCA inputs per channel, and the Rubicon has a mini-Din input. Oh...and my PG EQ232 could both accept and output balanced signals. Sort of. It would just be unnecessary redunancy. Just place the Symbalink transmitters close to the HU, and you'll run balanced all through the vehicle. No point in spending the [IMG]//content.invisioncic.com/y282845/emoticons/greedy.gif.5a53e6246569d7ab79867170f3b06629.gif[/IMG] on the BLA to convert balanced to unbalanced, just to input it into the Symbalink system when you could just run unbalanced directly out of the HU to the Symbalink system. [/QUOTE]

Verification