Reply to thread

Message: <blockquote data-quote="nuttcase21" data-source="post: 2835766" data-attributes="member: 561651"><p>okay here's how it works:  there are three sets of outputs right, a front, rear, and non-fader sub.  when you enable the active crossover section and use a 3-way setup for the front stage(no rear fill) you use all three sets of outputs.  the front outs run your tweets, the rear outputs run your mids, and the non-fader outs run your mid-bass.  that leaves no outputs for the sub.  I can't split off of any of the aforementioned sets because they'll be crossed over at frequencies too high for the sub.  I also can't split any of the outputs because there are three different speaker sizes and types, all of which require different crossover points.</p></blockquote><p></p>

Top