Reply to thread

Message: <blockquote data-quote="ramos" data-source="post: 46106" data-attributes="member: 540858"><p>Am I correct in thinking you have one 12" ? If so, your only going to be able to get 75w out of the amp 37.5w x 2 4ohm. Each coil on it's own channe.  What kind of amp is it ?  If you parallel the coils you will get a 2ohm load. Which according to your amp specifications, is too low. If you wire the coils in series you will get an 8ohm load. Which means you would end up with about the same 75w. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif</p></blockquote><p></p>

Top