Reply to thread

Message: <blockquote data-quote="ace7733" data-source="post: 44894" data-attributes="member: 542368">I have a better idea (maybe).  I would get the dvc and wire them in parallel to produce a 4 ohm load and then you'll only be putting 300 or so into each one.I started to suggest getting a jbl 600.1 and going with the svc's in parallel like drasik and jt said, but the 600.1 is about $200 and the 1200.1 is only $285 so it's a better deal, and if you decide to upgrade later it would be nice to already have a 1200.1.I'm new to this too, so someone correct me if I'm wrong.My perfects should be here wednesday (my b-day) and I started to go with the svc, but that would have been a 1.33 ohm load and I would have been overpowering them by over 100 watts, so I went with the dvc, now it will be a 2.67 ohm load and they should be getting close to that 350rms.</blockquote>

Top