Reply to thread

Message: <blockquote data-quote="Greg B" data-source="post: 8924338" data-attributes="member: 680429">So I put a new 12w6 in a box I had sitting around. It's 2 cubes with 37.5" port area tuned to around 38. It actually sounds great but unloads on what seems to be lower frequencies. I know the right answer is to build a new one but I'd like to make this one work if possible. It's very well built and fits the space I have perfect.I was thinking if I add another layer of MDF it would lower the port area to around 28" and drop the frequency some. If it's the tuning that's causing it to unload I could also lengthen it since I'm a good amount over the spec'd volume. Maybe both. Either way I'd appreciate any advice on what I should try.</blockquote>

Top