Reply to thread

Message

<blockquote data-quote="Prowler573" data-source="post: 3151217" data-attributes="member: 561023">Nope.For a proper amp install you obviously will need to connect various cables to the amp to make it work properly.Naturally, they need power and ground to supply energy to the amp.It also needs RCA cables to carry the source signal from your Pioneer deck to the amp.It needs speaker wire to route the amplified source signal to the speaker(s) it is powering.It also needs a remote activation lead connected to the appropriate terminal which will tell it to turn on and off with the headunit.This last wire is what I was referring to. You can have a single lead coming from the headunit to the first amp. The wire coming from the HU will attach to your amp&#039;s remote turn-on input terminal. It is acceptable to have a second lead attached to this terminal on the first amp jumping over to the same terminal (in regards to function) for the second amp so that it might know when to turn on and off as well. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif</blockquote>

[QUOTE="Prowler573, post: 3151217, member: 561023"] Nope. For a proper amp install you obviously will need to connect various cables to the amp to make it work properly. Naturally, they need power and ground to supply energy to the amp. It also needs RCA cables to carry the source signal from your Pioneer deck to the amp. It needs speaker wire to route the amplified source signal to the speaker(s) it is powering. It also needs a remote activation lead connected to the appropriate terminal which will tell it to turn on and off with the headunit. This last wire is what I was referring to. You can have a single lead coming from the headunit to the first amp. The wire coming from the HU will attach to your amp's remote turn-on input terminal. It is acceptable to have a second lead attached to this terminal on the first amp jumping over to the same terminal (in regards to function) for the second amp so that it might know when to turn on and off as well. [IMG]//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif[/IMG] [/QUOTE]

Verification