Reply to thread

Message

<blockquote data-quote="Clarion_Guy" data-source="post: 205852" data-attributes="member: 546038">Ok, so it seems my new setup is going to involve me spending some money on the wiring etc...currently I have this installedClarion APX200.2 (two channel amp 220 x 1 @ 4 ohm) max current drawn 28 ampsRegular Ring connected to battery ---&amp;gt; 8 gauge wire --&amp;gt; AGU fuse holder with 35 amp fuse in it --&amp;gt; then straight to amp..I&#039;m purchasing a Visonik V900xd...I want to run both amps (CLarion for fronts) Visonik for sub(s)THis may sound complicated so bear with me..I know this amp has capabilities to put out approx 1500 watts! (NO way in hell i will be running that much ... I THINK my alternator will die before that amount of wattage produces)..I will probabl run the amp no lower than 2 ohmm ... and perhaps even at 8 ohm (cuz my sub handles only 400 rms...)Its just I want to be able to have future upgrade (if i decide to get a new alternator or new subs)anyways ... to keep COST DOWN and ensure FULL SAFETY what do I need?I&#039;m seeing the appox max amps will be about 140 AMPSI&#039;m use to purchasing Fuse holders for 2-3 bucks USA dollars ... fuses for 15 cents and the 8 gauge wire for about 10-15 cents a foot ....This store does not carry ANL fuses , Holders, or anything lower than 4 awg... SUCH A ripp off IMO to buy that Stinger/Phoenix GOld stuff... Do i have a choice???? :S</blockquote>

[QUOTE="Clarion_Guy, post: 205852, member: 546038"] Ok, so it seems my new setup is going to involve me spending some money on the wiring etc... currently I have this installed Clarion APX200.2 (two channel amp 220 x 1 @ 4 ohm) max current drawn 28 amps Regular Ring connected to battery ---> 8 gauge wire --> AGU fuse holder with 35 amp fuse in it --> then straight to amp.. I'm purchasing a Visonik V900xd... I want to run both amps (CLarion for fronts) Visonik for sub(s) THis may sound complicated so bear with me.. I know this amp has capabilities to put out approx 1500 watts! (NO way in hell i will be running that much ... I THINK my alternator will die before that amount of wattage produces).. I will probabl run the amp no lower than 2 ohmm ... and perhaps even at 8 ohm (cuz my sub handles only 400 rms...) Its just I want to be able to have future upgrade (if i decide to get a new alternator or new subs) anyways ... to keep COST DOWN and ensure FULL SAFETY what do I need? I'm seeing the appox max amps will be about 140 AMPS I'm use to purchasing Fuse holders for 2-3 bucks USA dollars ... fuses for 15 cents and the 8 gauge wire for about 10-15 cents a foot .... This store does not carry ANL fuses , Holders, or anything lower than 4 awg... SUCH A ripp off IMO to buy that Stinger/Phoenix GOld stuff... Do i have a choice???? :S [/QUOTE]

Verification