Reply to thread

Message: <blockquote data-quote="ramos" data-source="post: 5938989" data-attributes="member: 540858"><p>Don't think there are any pics of it. I just took some strips of neoprene about and inch wide. Sprayed them down with glue, and folded it in half. Then glue this to the back side of the door panel around the perimeter. The A6 had a nice little lip in the back of the panel already. Took a little elbow grease to get the door panel back on. But the improvements were worth it. It works two fold, it seals the door up better than what it was, and it also breaks the physical contact of the plastic panel on the metal door alleviating a lot of the buzzes. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif</p></blockquote><p></p>

Top