Reply to thread

Message: <blockquote data-quote="Ryde _Or_Die" data-source="post: 2986349" data-attributes="member: 552959"><p>Ok here's what I have. 5gauge power going to a distribution block and then to each amp. Each amp has its own ground which are identical just on opposite sides of the truck. they consist of 8gauge wires screwed down to the bare floor of the truck. The sub is a dvc 2ohm sub that has a single terminal on the box. The pos. from the terminal goes to one vc. The neg. goes to the other vc. Then a wire goes from each vc's pos. and another wire connects the neg. I want to replace the power with 2ohm also. Any other ideas?</p></blockquote><p></p>

Top