Reply to thread

Message

<blockquote data-quote="1hawaii50" data-source="post: 5144370" data-attributes="member: 593962">Most certainly not!&nbsp; That is why I&#039;m asking...I want to be sure I have this right before I order speakers that will not fit in the door.&nbsp; Please bear with me here because I don&#039;t know if I&#039;m understanding this correctly or not.&nbsp; Crutchfield says that there is 1.93&quot; of mounting depth, that means with the speaker sitting flush in the door that the magnet can &quot;sit&quot; 1.93&quot; into the door before it hits the rolled down window.&nbsp; Crutchfield says I have .83&quot; of mounting heigth.&nbsp; That means that I have .83&quot; between the metal door panel (where the speaker will sit), and the door panel.&nbsp; So if the speaker protrudes more than .83&quot; from the door, then it will hit the panel.&nbsp; Is my thinking correct here?&nbsp; If not, could somebody help me out...I thought I had this figured out, but now I&#039;m just confusing myself.&nbsp; I&#039;m thinking that between the backside of the door panel, and the rolled down window, I have a space of 2.76&quot; to play with.&nbsp; If the DLS speakers show a mounting depth of 2.48&quot; and an installation depth of 2.6&quot;, then can I space them out to fit into the door?&nbsp; If I need other measurements from the speakers, what do I need to know?I apologize for the stupid questions, but now I&#039;m just confusing myself //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif</blockquote>

[QUOTE="1hawaii50, post: 5144370, member: 593962"] Most certainly not! That is why I'm asking...I want to be sure I have this right before I order speakers that will not fit in the door. Please bear with me here because I don't know if I'm understanding this correctly or not. Crutchfield says that there is 1.93" of mounting depth, that means with the speaker sitting flush in the door that the magnet can "sit" 1.93" into the door before it hits the rolled down window. Crutchfield says I have .83" of mounting heigth. That means that I have .83" between the metal door panel (where the speaker will sit), and the door panel. So if the speaker protrudes more than .83" from the door, then it will hit the panel. Is my thinking correct here? If not, could somebody help me out...I thought I had this figured out, but now I'm just confusing myself. I'm thinking that between the backside of the door panel, and the rolled down window, I have a space of 2.76" to play with. If the DLS speakers show a mounting depth of 2.48" and an installation depth of 2.6", then can I space them out to fit into the door? If I need other measurements from the speakers, what do I need to know? I apologize for the stupid questions, but now I'm just confusing myself [IMG]//content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif[/IMG] [/QUOTE]

Verification